PD100 - Heavy Duty Automatic Stop/Pushing System

Auto. Stops & Pushers

PD100   Heavy Duty Automatic 
                Stop / Pushing System

The PD100 saves time and money with quick and precise positioning. The pneumatic Auto-brake, located directly on the moving carrier, locks in the stop position eliminating slip and motor load. With its precision steel guide and hardened double ball bearings, the moving carrier is built to last. The system also features a servo motor with a precision rack and pinion to ensure fast, accurate positioning with no backlash. Adjustable table legs allow for easy setup with any available saw, drill, ironworker and punching machine.

Features

• Steel guide with precision rack & pinion 
  built in metal extrusion with cable tray for 
  easy retrofit on existing conveyors or tables
• Carriage with hardened double ball bearings
• Spring shock absorber arm with manual lift 
   and 25in length adjustment
• Position controller for single position with
  quantity counter, manual mode, inch/metric
  conversion, automatic gauge arm retract and
  control stand
• Left or right side mounting

Specifications

• Repeatability:+/- 0.001in ( +/- 0.03mm)
• Accuracy: +/- 0.001in/ft (+/- 0.1mm/m)
• Travel speed: 15in/sec or 30in/sec 
• Measuring length: 5ft to 30ft, others on 
  request
• Total length: Measuring length + 24in 
• Feedback: Automatic out-of-position feedback
• Brake: Pneumatic brake (optional), 
  recommended for material weight over 110lbs
• Brake force:
         200N with out-of-position feedback
       2000N with pneumatic brake option

STOP Options
• Pneumatic Auto-brake system
• Pneumatic arm lift and lower
• Pneumatic arm retract with pneumatic shock 
  absorption
• 3,000 line program memory and 
  outputs for fully automatic operation          
• RS232 interface with TS312 communication 
  software for PC

PUSHER Specifications
• Max. Pushing force: 180lbs
• Travel speed: 16in/sec (0.4m/sec), 
   higher on request
• Brake force: 2,000N with pneumatic brake 
  (optional)

PUSHER Options
• Push Feed Carriage 
• Horizontal manual clamp with 25in length 
  adjustment
• Horizontal or vertical pneumatic clamp with 
  25in length adjustment
• Width  and/or height  adjustable clamp
• 3,000 line program memory and outputs for 
  automatic operation          
• RS232 interface with TS312 communication 
  software for PC
• End limit switches 

Roller conveyors, series RC and RH
• Open conveyor, steel construction with 
  metal rollers 
• Stands with flexible height adjustment from 
  27-3/8” to 39-3/8”
• Capacity: 135lbs/ft (RC) or 620lbs/ft (RH) 
• Width between rail: 13/15/19 inch standard, 
  others on request
• Plastic rollers, vertical rollers and metal 
  safety inserts available

Flat TABLE, series RF 
• Solid steel top with 135lbs/ft capacity
• Stands with flexible height adjustment from 
  27-3/4in to 39-3/4in
• Overall width: 12/16/22 inch standard, others 
  on request